If you're working with network cables, chances are you've encountered the need to terminate them with connectors. Terminating cables can seem intimidating at first, but with the right tools and a bit of practice, it can be a breeze. One tool that can make the process a lot easier is the RJ45 pass thru connector.

RJ45 pass thru connectors, also known as pass through connectors or modular plugs, are connectors that allow you to easily terminate cables with a connector. They have a unique design that allows you to insert the wire into the connector and then pass it through a crimping tool, which secures the wire in place and trims off the excess. This eliminates the need to pre-trim the wire and makes the process of terminations much faster and more accurate.

So, how do you use an RJ45 pass thru connector? Here's a step-by-step guide:

  1. Gather your materials: To start, you'll need an RJ45 pass thru connector, a crimping tool, and a network cable. You'll also need a wire stripper and a cable tester if you don't already have those tools.

  2. Strip the cable: Using your wire stripper, strip off about an inch of the outer jacket of the cable to expose the wires inside.

  3. Arrange the wires: Depending on the type of cable you're using (e.g., Cat5e, Cat6, etc.), there will be a specific wire arrangement that you need to follow. Using the wiring diagram for your cable type, arrange the wires in the correct order and trim off any excess.

  4. Insert the wires into the connector: Take your pass thru connector and insert the wires into the appropriate slots, making sure they are seated all the way in.

  5. Pass the connector through the crimping tool: Once the wires are in place, hold the connector firmly and pass it through the crimping tool. The tool will crimp the connector and trim off any excess wire.

  6. Test the connection: Once you've crimped the connector, it's a good idea to test the connection to make sure it's working properly. You can do this with a cable tester or by connecting the cable to a device and testing it.

With a little bit of practice, you'll be a pro at terminating cables with RJ45 pass thru connectors in no time. Happy networking!

 Purchase Here 

 

Older Post Newer Post